FS-18 FEED SENSOR



FS-18 FEED SENSOR

Free
Back

Reliability

Use of electronic switches ensures a unique reliability, all electronics are completely enclosed in a special casing to ensure maximum protection against humidity, dust and other harsh elements found in poultry and pig installations.

Typical Applications

The FS-18 sensor can replace any mechanical switch in hoppers, pan feeders and feed silos without any modification of electrical circuits.

Technical information

The FS-18 sensor is designed with a built in micro-processor ensuring high quality performance in sensitivity, time delay accuracy, easy setup and a wide range of working temperatures.

With FS-18 sensor smart potentiometer technology, you can easily set sensitivity, time delay and polarity (NO or NC).

Time delay can be set from 1 to 120 seconds using 10 second steps.

With its 2-wire cable, the FS-18 can be connected in serial to load currents in ranges of 4.5-300 mA.

Installation

Use the two supplied lock nuts to secure the sensor to the hopper side wall, feed plate or feed silo.

 Technical Specifications:

Power supply 24-250VAC
Frequency 45-70Hz
Max Current 300mA
OFF-state current < 1 mA
Min. operational current  4.5 mA
Distance of activation Adjustable 0-8mm
Time Delay Adjustable 1-120sec
Temperature operation -20 +70
Sensor Length without cable 111.5 mm
Sensor Diameter 18.5mm
Cable 2×0.34mm2 (2x22AVG)

Length: 2000mm

Diameter: 4.4mm

Weight incl. cable and two lock nuts 80g

 

 

Share